Juki LU-1508NS Walking Foot/Needle Feed Heavy Duty Sewing Machine Made in Japan

JUKI LU-1508 Walking Foot/Needle Feed Heavy Duty Sewing Machine Product Details

• Single Needle
• Needle Feed And Walking Foot
• 2500 Stitches Per Minute
• New Rectangular Feed Prevents Gathering
• Includes Table, Stand, And Motor
• Handles Heavyweight Materials
• Industrial Sewing Machine


Specifications:


• New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
• Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
• Compared with elliptical feed, rectangular feed helps reduce gathered stitches
• With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
• Well tensed seams are consistently produced without pitch errors
• With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
• Stitch length can be easily selected by the stitch dial
• Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large handwheel
• Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
• Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
• Alternating vertical movement mechanism prevents irregular stitches
• High 16 mm presser foot lift enables easy material handling
• Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
• If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
• Pressing the reset button will immediately return the machine back to the normal state.
  
  

   
  Maximum stitch length:         9 mm 
  Needle bar stroke:             36 mm 
  Alternating vertical movement: 2.5 mm - 6.5 mm 
  Thread take-up:                slide type 
  Hook:                          Vertical-axis, double-capacity hook 
  Needle:                        135x17 Nm160 
  Thread:                        #30 #5, B46 B138 
  Weight:                        94 lbs 





---

You may also be interested in the product(s) below:

---

Industrial Sewing Thread

Industrial Needles

Industrial Machine Table with Motor